Since we have some restrictions and can not support all kinds of USB stick, we
provide another option (TFTP) to upgrade Enigma2/Spark.
Preparation:
1. Install TFTP tools [csicotftp11.rar] to your PC
2. Set your PC IP addr to [192.168.40.19]
3. connect your PC to STB by LAN, now we only support LAN, do not support WLAN
4. Set default booting system to [spark]
Upgrade Step:
1. copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
3. Keep Pressing [OK] Button in Front Panel, then power on STB.
4. After 5 seconds you will see [Forc] in LED, release [OK] button and press
Button.
5. if everything OK, You will see [T LD] shining in LED and you will see some debug
information in TFTP Server, like
“ Mon Oct 25 14:02:36 2010: Sending ‘mImage’ file to 192.168.40.19 in binary mode
Mon Oct 25 14:02:39 2010: Successful.
Mon Oct 25 14:02:50 2010: Sending ‘userfsub.img’ file to 192.168.40.19 in binary
mode
Mon Oct 25 14:03:33 2010: Successful.”
6. if upgrade success, You will see [SUCC] and STB reboot automatically
If upgrade not finishes in 5 minutes, then there must be something wrong, please
check your configuration and re-try.
provide another option (TFTP) to upgrade Enigma2/Spark.
Preparation:
1. Install TFTP tools [csicotftp11.rar] to your PC
2. Set your PC IP addr to [192.168.40.19]
3. connect your PC to STB by LAN, now we only support LAN, do not support WLAN
4. Set default booting system to [spark]
Upgrade Step:
1. copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
3. Keep Pressing [OK] Button in Front Panel, then power on STB.
4. After 5 seconds you will see [Forc] in LED, release [OK] button and press
Button.
5. if everything OK, You will see [T LD] shining in LED and you will see some debug
information in TFTP Server, like
“ Mon Oct 25 14:02:36 2010: Sending ‘mImage’ file to 192.168.40.19 in binary mode
Mon Oct 25 14:02:39 2010: Successful.
Mon Oct 25 14:02:50 2010: Sending ‘userfsub.img’ file to 192.168.40.19 in binary
mode
Mon Oct 25 14:03:33 2010: Successful.”
6. if upgrade success, You will see [SUCC] and STB reboot automatically
If upgrade not finishes in 5 minutes, then there must be something wrong, please
check your configuration and re-try.